SuperTectum
PVC Primer

SuperTectum
PVC Primer
Fast curing primer for all existing PVC membranes




One-component, low-viscosity material for priming of all existing old and new PVC membranes before applying SUPERTECTUM polyurethane coating.
Features and benefits
One component
Low viscosity
Extremely fast cure
Application procedure
1
Wash the surface of the PVC membrane with a high-pressure washer. Carefully clean the surface from dust, dirt, rust, oil, cement mortar, plaster layer, paint and other materials that imped the penetration of the material into the structure of the PVC membrane.
2
Apply only on a dry surface and at air temperature not lower than 5° C.
3
Apply with a roller or brush at a flow rate of 150-300 ml/m2 (depending on the age of the PVC membrane). The subsequent waterproofing coating can be applied as soon as the primer is no longer sticky, in about 15-30 minutes.
General information
Packaging
20 l, 1l
Shelf life
It can be stored for 12 months minimum in the original unopened containers in a dry place at a temperature from 5° C to 25° C. Once opened, use as soon as possible.
Safety information
Contains volatile flammable solvents. Apply in well-ventilated, no smoking areas, away from naked flames. Indoors, use ventilators and carbon active masks. The MSDS (Material Safety Data Sheet) is available on request.
Technical specifications
In liquid form (before use):
Properties
Units
Method
Specification
Viscosity (Brookfield)
cP
ASTM D2196-86 at 25°C
20 – 60
Specific weight
гр/см3
ASTM D1475 / DIN 53217 / ISO 2811 at 20°C
0.8 – 0.9
Get TDS on this material
ANT ALLIANCE is an exclusive supplier of SUPERTECTUM products worldwide.